SDV 11G

product
  • Transmit Capacity up to  350 Mbps Full Duplex
  • SW optional speeds: 155 to  350 Mbps
  • Moduation types: 4 to 256QAM
  • ACM - Adaptive modulation and Coding
  • Channel spacing: 40 or 56  MHz
  • RF output power up to +15 dBm
  • Duplex spacing 490 MHz or 530 MHz
  • ATPC - Automatic Transmit Power Control
  • Ethernet interface 1000Base-T / 100Base-Tx
  • SNMP  management, SNMP MIB file
  • Power Over Ethernet, IEEE 802.3at (PoE+)
  • Power Consumption up to 25 W  (max. 30 W)
  • FOD (Full Outdoor), IP-67
  • Operational temperature -30 °C to +50 °C

Description

SDV 11G is a digital microwave communication device that provides wireless "point to point" link for transfer of data, voice and video. It is designed to be used in the 10,7-11,7 GHz licensed frequnecy band.

The radio supports full-duplex  transmission speed 155 / 190 / 220 / 240 Mbps for 40 MHz channel width and 270 / 310 / 350 Mbps for 56 MHz channel width.

It is equipped with an integrated interface Gigabit Ethernet (1000BASE-T) /  Fast Ethernet (1x100Base-Tx).

SDV 11G is designed as Full Outoor Unit (FOD) with direct mounting to a parabolic antenna. These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows radio link used in very difficult climatic conditions.
 

FEATURES
 

  • Modulation: 32 QAM, 64QAM, 128QAM, 256QAM1
  • Forward Error Correction - LPDC (Low Density Parity Check)
  • ATPC - Automatic Transmit Power Control
  • Software configurable channel frequency
  • Software adjustable output power (up to 15 dBm)
  • ACM - Dynamic switching of modulation schemes (in poor radio conditions)
  • Encryption radio beam against unwanted interception
  • Supports IEEE 802.3at Power Over Ethernet plus (PoE+)
  • Supports IEEE 802.1q VLAN and VLAN double tagging.
  • Supports IEEE 802.3x Flow Control
  • Built-in BER, RSSI and Quality meter
  • SNMPv1 protocol is implemeted (downloadable MIB file)
  • Easy aligning with the Beeper, built-in RSSI meter or measuring the DC voltage
  • Supports the transfer of "Giant Packet" about the size of 1916 bytes (used by some routers such as Cisco)
  • SW upgrade to higher trasmission speed (by entering the license key).
  • The choice of polarization by simply turning the transmitting device 90°
  • Fast and easy installation
  • Low power consumption

1Modulation 256-QAM is automatically enabled when you purchase a license for 128-QAM modulation.

datasheet

 

Specification

General RF

 
Frequency range 10,7 - 11,7 GHz
Frequency stability ±5 ppm
Forward Error Correction LPDC

Transmitter

       
Output Power +15 dBm
ATPC yes
Output Power Selection -7, -5, -3, 0, 3, 6, 9, 12, 15 dBm
Output Power measuring accuaracy 2 dB in the whole temperature range

Receiver

 

____________  Channel spacing 40 MHz  ____________

Modulation Capacity of radio (Mbps) Real transmission rate (Mbps) Sensitivity for BER 10-6 (dBm) Sensitivity for BER 10-3 (dBm)
128 QAM 220 212 -71 -73
64 QAM 190 188 -74 -76
32 QAM 155 149 -77 -79

 

____________  Channel spacing 56 MHz  ____________

Modulation Capacity of radio (Mbps) Real transmission rate (Mbps) Sensitivity for BER 10-6 (dBm) Sensitivity for BER 10-3 (dBm)
128 QAM 310 303 -68 -70
64 QAM 270 268 -71 -73

System specification

Ethernet Interface 1000Base-T / 100Base-TX
Summit management System Windows GUI, Linux (WINE)
SNMP v1  MIB file included

Power Supply and Cable

Power Over Ethernet plus supports IEEE 802.3at (PoE+)
Power consumption up to 25 W (max. 30W)
Cable oudoor FTP, Cat 5e

Antennas

     
Product ANT 10A65 ANT 10A90 ANT 10A120
Parabolic antenna Ø (cm) 65 90 120
Gain (dB) 35,7 37,8 40,2

Environmental

Operational temperature -30 až 50°C
Ingress Protection IP-67

Mechanical

Mechanical concept Full Outdoor Unit (FOD)
Dimension 150 mm × 240 mm × 240 mm
Weight 3,5 kg

Compliance

Rádio ETSI EN 302217-2-2-V1.4.1
EMI/EMC ETSI EN 301489-1

 

Accessories

Antennas

  • Parabolic antennas 10GHz

     

     

     

    ANT 10B35:


    • 10,15 - 10,8 GHz

    • Diameter 35 cm

    • Gain 29,4 dBi

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3

    • Radition patterns

     

     

     

     
     

    ANT 10B65:


    • 10,15 - 11,7 GHz

    • Diameter 65 cm

    • Gain 35,7 dBi

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3

    • Radiation pattern

     

     

     

     
     

    ANT 10A90:


    • 10,15 - 11,7 GHz

    • Diameter 90 cm

    • Gain 37,8 dBi

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3 (with absorb. material)

    • Datasheet

     

     

     

     
     

    ANT 10A120:


    • 10,15 - 11,7 GHz

    • Diameter 114 cm

    • Gain 40,2 dBi

    • Operational temp -40 °C to 55 °C

    • ETSI EN 302 217 Class3 (with absorb. material)

    • Datasheet

         

     

     

Power Supplies

  • Power supplies

    The microwave link requires a power supply according to IEEE 802.3at (Power Over Ethernet).

    PoE injectors available in our store:

     


    PowerDsine 90001G-40

    • Gigabit PoE AC/DC injector
    • IEEE 802.3at
    • AC input 100-240 V
    • DC output 56 VDC
    • Output power 40 W
    •  -10°C až 45°C
    • datasheet

     

         
     

    Phihong POE36D-1AT

    • Gigabit PoE DC/DC injector
    • IEEE 802.3AT
    • DC input 36-72V
    • DC ouptpu 56V DC
    • Output Power 33,6 W
    •  -20°C až 50°C
    • datasheet
       

     

     

     

To download

Firmware

  • CPU
    1.31
    Firmware pro processor upgrade.
  • DSP
    14/12/2011
    Firmware pro Digital Signal Processing upgrade.

Software

  • RF PATH
    5.2 (ver. DB 2.7)
    Radio Planning Tool software to assist the design of microwave radio links. Radio link calculator compute the Fade Margin, Received Signal Strength, Radio Distance and more.
  • SMS
    8.2.31
    The "Summit management System" is the grapical user interface used to manage and configure radio. There is no need to install it. The SMS runs on MS Windows or Linux using WINE.

Document