GTH 17/24G

2Gbps, XPIC, SFP+

UNIQUE

GTH 17/24G is a Full-Outdoor and Full-Duplex microwave link operating in the 17 and 24 GHz license-free band. This hybrid link broadcasts/receives data in one direction in both polarizations (XPIC) in 17GHz band and at the same time in other direction broadcasts/receives data in both polarizations (XPIC) in 24GHz band.

This microwave solution with the bandwidth up to 160 MHz allows higher transmission speed over a much longer distance in the free band. In addition, low level modulation provides much greater radio resistance to interference.
This unique PtP technology has been developed and is manufactured by SUMMIT DEVELOPMENT, an established Czech manufacturer of microwave links, at their own software digital radio.

  • Software Defined Radio SUMMIT DEVELOMPENT (own modem)
  • Transmission capacity up to 2 Gbps Full Duplex
  • XPIC (link broadcasts/receives data in both polarizations at the same time)
  • Bandwidth up to 160 MHz
  • FEC (Reed Solomon, Interleaving)
  • 1 x SFP+(10 Gbps interface), 1 x SFP, 1 x metallic port RJ-45, SFP/RJ-45
  • AATPC (Automatic Adaptive Transmit Power Control - when modulation is reduced, AATPC increases power to the maximum value for respective modulation)
  • Security and Access management, digitally encrypted transmitter
  • Advanced QoS Port-based and Bandwidth control Management
  • Optimal solution for Triple Play services with IPTV support
  • Support IEEE 802.1Q VLAN (also QinQ)
  • Support packet-flow control acc. to IEEE 802.3x
  • Power supply via Ethernet cable acc. to IEEE 802.3bt
  • Power supply via separate cable (DC input  30 to 57V)
  • Built-in spectral analyzer for searching for free channel
  • Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
  • Configuration of radio link in Windows, Linux, Android, iOS
  • Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
  • Monitoring of device parameters in real time (input voltage, current, power …)
  • Automatic detection of radio polarization
  • Direct installation of parabolic antenna

Benefits

High quality
High power
Full Outdoor
Channel size
Finely tuning
Latency
Asymmetric Bandwidth
Easy installation

Specifications

GTH 17/24G

2Gbps, XPIC, SFP+

General RF
Frequency band17.1-17.3  / 24-24.25 GHz
Channel size40 to 160 MHz
Frequency stability± 5 ppm
FECReed-Solomon, Interleaving
Asymmetric BandwidthYES
ACMYES
XPICYES
AATPCYES
Transmitter
Output power-20 to +15 dBm (± 1 dB)
APC (Autom. Power Control)YES
APCmin, APCmaxYES
Regulace APC na RSSIYES
Transmission rate 160 MHz, XPIC
Capacity of radio [Mbps]Modulation (XPIC)Power of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
19922 x 128 QAM86-59
17082 x 64
QAM
86-61
14232 x 32
QAM
1010-66
11382 x 16
QAM
1212-68
8542 x 8
QAM
1414-70
5692 x 4
QAM
1518-75
Transmission rate 160 MHz
Capacity of radio [Mbps]ModulationPower of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
996128 QAM88-62
85464 QAM88-64
71132 QAM1010-69
56916 QAM1212-71
4278 QAM1414-73
2844 QAM1515-78
Transmission rate 80 MHz, XPIC
Capacity of radio [Mbps]Modulation (XPIC)Power of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
9962 x 128 QAM86-62
8542 x 64
QAM
86-64
7112 x 32
QAM
1010-69
5692 x 16
QAM
1212-71
4272 x 8
QAM
1414-73
2842 x 4
QAM
1515-78
Transmission rate 80 MHz
Capacity of radio [Mbps]ModulationPower of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
498128 QAM88-65
42764 QAM88-67
35532 QAM1010-72
28416 QAM1212-74
2138 QAM1414-76
1424 QAM1515-81
Transmission rate 40 MHz, XPIC
Capacity of radio [Mbps]Modulation (XPIC)Power of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
4982 x 128 QAM86-65
4272 x 64
QAM
86-67
3552 x 32
QAM
1010-72
2842 x 16
QAM
1212-74
2132 x 8
QAM
1414-76
1422 x 4
QAM
1515-81
Transmission rate 40 MHz
Capacity of radio [Mbps]ModulationPower of 17 GHz transmitter [dBm]Power of 24 GHz transmitter [dBm]Sensitivity for BER 10-6 [dBm]
249128 QAM88-66
21364 QAM88-68
17732 QAM1010-73
14216 QAM1212-75
1068 QAM1414-77
714 QAM1515-82
Antennas
TypeDiameter [cm]Gain 17 GHzGain 24 GHz
ANT 17/24B35-C33533 (± 1dB)36 (± 1dB)
ANT 17/24B65-C36538 (± 1dB)41 (± 1dB)
ANT 17/24A90-C39041 (± 1dB)44 (± 1dB)
ANT 17/24A120-C312043 (± 1dB)45,5 (± 1dB)
Consumption max. 5W on ports SFP/SFP+
Interface
Port 1 (SFP1)1000Base-T/1000Base-SX/1000Base-LX (SFP)
Port 2 (ETH1)1000Base-T (RJ-45 including PoE)
Port 3 (SFP2+)10GBase-SR/10GBase-LR/1000Base-T (SFP+)
Port 4 (PWR)DC power supply 30-57 V
Port 5 (SFP3)1000Base-SX/1000Base-LX (SFP)
Management
GUISummit Management System (Windows, Linux-Wine)
MUISummit Tools (Android, iOS)
SNMPv2c, MIB file
Mechanical
Mechanical conceptFull Outdoor
Dimension145 mm x 240 mm x 240 mm
Weight3,5 kg
* In power supply port of device
Power supply / Cable
Power Over EthernetIEEE 802.3bt (36-57 VDC) *
DC port30-57 VDC *
Consumptionup to 35W
Consumption including all SFP/SFP+ portsup to 40W
Ethernet cableoutdoor FTP CAT5e up to 100 m
Environmental
Operational temperature-20°C to 50°C
Ingress ProtectionIP-67
Compliance
IEEE 802.1qVLAN tagging
IEEE 802.adQinQ
IEEE 802.3xFlow Control
RFC2544YES

Antennas

  • ANT 17/24B35-C3
    17,1 - 17,3 / 24 - 24,25 GHz
    Diameter 35 cm
    Gain 33 (± 1dBi) for 17 GHz
    Gain 36 (± 1dBi) for 24 GHz
    Weight 2,5 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17/24B65-C3
    17,1 - 17,3 / 24 - 24,25 GHz
    Diameter 65 cm
    Gain 38 (± 1dBi) for 17 GHz
    Gain 41 (± 1dBi) for 24 GHz
    Weight 7,5 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17/24A90-C3
    17,1 - 17,3 / 24 - 24,25 GHz
    Diameter 90 cm
    Gain 41(± 1dBi) for 17 GHz
    Gain 44 (± 1dBi) for 24 GHz
    Weight 19 kg
    Compliance ETSI EN 302 217 Class3
  • ANT 17/24A120-C3
    17,1 - 17,3 / 24 - 24,25 GHz
    Dameter 120 cm
    Gain 43 (± 1dBi) for 17 GHz
    Gain 45,5 (± 1dBi) for 24 GHz
    Weight 35 kg
    Compliance ETSI EN 302 217 Class3

Video

Accessories

  • SET 1

    (for Eth1, Eth2, PWR)
    SET structure:
    1x output
    2x rubber seal

  • SET 2

    (for SFP1, SFP2)
    SET structure:
    1x output
    3x rubber seal

  • PLUG

    (for Eth1, Eth2, SFP1, SFP2, PWR)
    Plug structure:
    1x plug
    1x rubber "O" ring

We use cookies to personalize content and ads, provide social media functions and analyze our traffic. We share information about how you use our site with our social media, advertising and analytics partners. Show details.

Understand